-40%
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator

Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator

$ 4.04

Availability: 100 in stock
  • Material: circuit board, electronic parts
  • Return shipping will be paid by: Buyer
  • Output voltage range: 3.6-30V
  • Type: Optocoupler Isolation Module
  • Brand: Unbranded
  • Restocking Fee: No
  • Condition: New
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Package Contents: 1 *PC817 4-channel photocoupler isolation module 3.6-30V
  • Size: 48 x 38mm / 1.89 x 1.50in (L x W)
  • Drive signal voltage range: 3.6-24V
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted

    Description

    Product Description
    Optocoupler Module 4-Channel Board For Arduino Isolation Opto-Isolator
    Product description:
    100% brand new and high quality
    Made of high-quality materials, durable
    This module allows you to use low-level signals to control higher voltages, for example, to control 3V or 5V voltage of 9V or 12V voltage. It uses PC817 opto-isolator. With four channels. Very suitable for use in noisy circuits where signal lines need electrical isolation
    Input voltage 3.6V to 24V
    Output voltage 3.6V to 30V
    Jumper to switch the output from high level to low level
    All four channels are indepen-dent and can use different voltages at the same time
    Material: circuit board, electronic parts
    Size: 48 x 38mm / 1.89 x 1.50in (L x W)
    Hole distance: long side: 42mm / 1.65in; wide side: 32mm / 1.26in
    Drive signal voltage range: 3.6-24V
    Output voltage range: 3.6-30V (the output current depends on the specific situation, the maximum does not exceed 10MA, the total power is inversely proportional to the voltage and current)
    Color: as shown
    Package list:
    1 *PC817 4-channel photocoupler isolation module 3.6-30V phototransistor for Arduino
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
    Payment
    We accept payment via Paypal only.
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    Delivery details
    We only
    ship to confirmed Paypal addresses.
    Please comfirm that your paypal address is in line with your shipping address.
    Please kindly note that
    the c
    ombined shipping
    is not provided
    because the shipping fee is calculated by weight. Also, the each additional item means
    exactly
    the the same color and size.
    It takes about
    7
    -15 working days to US; about 10-30 working days to other countries.
    Transit time may be a little delayed because of the
    bad
    weather and customs
    inspection
    . If you
    do
    not receive your
    item
    within 30 working days since payment finished, please contact us immediately for further assistance.
    Contact us
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
    p
    lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
    working hours.